Quick Setup Installation Wall Mount Ultrasonic Flow Meter Modular Ultrasonic Flow Meter
1.Press keys MENU 1 1 to enter M11 window to input the pipe outer diameter, and then press ENT key.
2.Press key ▼/- to enter M12 window to input the pipe outer diameter and then press ENT key. 3.Press key ▼/- to enter M14 window, and press ENT key to enter the option selection mode. Use keys ▲/+ and ▼/- to select the pipe material, and then press ENT key.
4.Press key ▼/- to enter M16 window, press ENT key to enter the option selection mode. Use keys ▲/+ and ▼/- to select the liner material, and then press ENT key. Select “No Liner”, if there is no liner.
5.Press key ▼/- to enter M20 window, press ENT key to enter the option selection mode. Use keys ▲/+ and ▼/- to select the proper liquid, and then press ENT key.
6.Press key ▼/- to enter M23 window, press ENT key to enter the option selection mode. Use keys ▲/+ and ▼/- to select the proper transducer type, and then press ENT key.
7.Press key ▼/- to enter M24 window, press ENT key to enter the option selection mode. Use keys ▲/+ and▼/- to select the proper transducer mounting method, and then press ENT key. 8.Press key ▼/- to enter M25 window and get the transducer installation distance.
9.Press MENU 2 6 to store the parameters setup