No mechanical inertia, fast response, good stability, can be used in automatic detection, adjustment and program control systems. The instrument is simple and reliable in structure, has no moving parts, and has a long working life.
No shut-off or blocking parts, there is no pressure loss and fluid blockage.
The measurement accuracy is not affected by the type of the measured medium and its temperature, viscosity, density, pressure and other physical parameters.
Different combinations of PTFE or rubber lining and electrode materials such as Hc, Hb, 316L, Ti can meet the needs of different media.
Various flowmeter models such as pipeline type and insertion type are available.
Using EEPROM memory, the measurement and operation data storage protection is safe and reliable.
There are two types of integrated and separate types.
High definition LCD backlit display.
The integrated electromagnetic flowmeter is formulated according to Faraday's law of electromagnetic induction and is used to measure the volume flow of conductive fluids. Due to its unique characteristics, it has been widely used in the measurement of various conductive liquids in industry. It is mainly used in chemical industry, papermaking, food, textile, metallurgy, environmental protection, water supply and drainage and other industries. It can realize system control with computer.
1. The electromagnetic flowmeter has no moving parts and no blocking parts, which will not cause pressure loss, and will not cause problems such as wear and blockage.
2. The electromagnetic flowmeter is a volume flow measuring instrument, which is not affected by the temperature, viscosity, density and conductivity of the measured medium (within a certain range) during the measurement process.
3. The electromagnetic flowmeter has a wide range, up to 1:100. In addition, the electromagnetic flowmeter is only proportional to the average flow velocity of the measured medium, and has nothing to do with the axisymmetric flow state (laminar flow or turbulent flow).
4. The electromagnetic flowmeter has no mechanical inertia, has a sensitive response, can measure the instantaneous pulsating flow, and has good linearity, so the measurement signal can be directly converted into a standard signal output by a converter linearly. The LD-T type can be indicated on the spot, and the LD type can be transmitted over a long distance.